Home > Drag and Drop 4

Drag and Drop 4

October 20th, 2017 Go to comments

Question 1

Question 2

Explanation

The control plane: The control plane is the brain of the router. It consists of dynamic IP routing protocols (that is OSPF, IS-IS, BGP, and so on), the RIB, routing updates, in addition to other protocols such as PIM, IGMP, ICMP, ARP, BFD, LACP, and so on. In short, the control plane is responsible for maintaining sessions and exchanging protocol information with other router or network devices.

The data plane: The data plane is the forwarding plane, which is responsible for the switching of packets through the router (that is, process switching and CEF switching). In the data plane, there could be features that could affect packet forwarding such as quality of service (QoS) and access control lists (ACLs).

Reference: http://www.ciscopress.com/articles/article.asp?p=2272154&seqNum=3

Question 3

Explanation

The “T” letter symbolizes for “twisted pair cable” so all “BASE-T…” types are copper.

Question 4


Question 5

Question 6

Question 7

Explanation

Minimum Time to Live: The TTL value for the first probes. The default is 1, but it can be set to a higher value to suppress the display of known hops.
Numeric display: The default is to have both a symbolic and numeric display; however, you can suppress the symbolic display.

Reference: https://www.cisco.com/c/en/us/support/docs/ip/routing-information-protocol-rip/13730-ext-ping-trace.html

Question 8

Question 9

Comments (19) Comments
  1. 3amar
    March 11th, 2018
  2. Andre
    April 5th, 2018
  3. kamal
    April 7th, 2018

    q2 correct answer is :
    #control plane:routing state exchange,filtering,device access
    #data plane :qos,establishing telnet sessions,data encapsultaion

  4. Ojo
    April 22nd, 2018

    I hate drag and drop

  5. AB
    April 23rd, 2018

    Ojo – Me2. Although they are no brainer but friggin time consuming.

  6. AB
    April 23rd, 2018

    @9tut

    In the quiz, the first questions answer shud be 124356 but if chooses this sequence then it marks it as fail and only accpets this sequence – 356124.

    It contradicts what’s being asked in the question “asks to arrange ascendingly”.

    Please check and rectify.

  7. 9tut
    April 23rd, 2018

    @AB: Please arrange ascendingly of each group. “356124” means “356” for “Copper” group and “124” for “Fiber” group.

  8. Tom
    April 24th, 2018

    is question 2 correct?

  9. amr osa
    April 28th, 2018

    Thanks god ia passed my exam 2day with score 915
    2 accesslist
    Eigrp Gre
    Eigrp Gre multilink
    Rip2
    Dhcp
    Dnd(Qos- bgp-cables-.other)
    McQ different

  10. Gregory
    May 5th, 2018

    @9TUT & @everybody else want to share thoughts

    Q9: + Administrative distance: indicator of the trustworthiness of the route
    + Destination network: remote network address
    + Metric: value used by the router to determine the preferred route
    + Next hop: network to which the router forwards packets on the associated route
    + Route source: code that indicates the method by which the router learned the route

    Shouldn’t Next hop & Destination network answers be reverse ?
    My thought I base this on is, that the “next hop” is a specific ip address (not a “NETWORK” !) and destination network is a whole subnet/network (thus not a remote network “ADDRESS”)

    Please comment if you agree or disagree. Thanx in advance.

  11. fces teban
    May 8th, 2018

    any comment about Gregorys point?

  12. Ronn
    May 21st, 2018

    I disagree with @Gregory, ’cause I think:

    – Remote network address: Where “remote” means a network or a network address that is beyond the scope of our network. (Usually after many hops).

    – Network to which the router forwards packets on the associated route: Where the router forwards packets to the network associated to the route and this would be the next hop.

  13. Ibtij
    May 24th, 2018

    Need the latest ccna 200-125 dumps. My exam is tommorow. ibtijay @ gmail . com

  14. gaurav4u
    May 25th, 2018

    @Gregory- I think, in Q9, terms used are bit confusing, but if you read it again and again, you will realize they are pretty much ok.

    – Destination network=Remote network address. I feel its ok because the “destination network” is the place where packets are meant to be sent ultimately.

    – Next hop: network to which the router forwards packets on the associated route. It also feels ok, because next hop is the next destination(router) where a packet is meant to be sent on its way to the final network ie. destination network.

  15. Vlonee
    May 26th, 2018

    how was your exam @ibtij?

  16. Greg
    June 6th, 2018

    @9tut

    Part of your answer at Q7 DnD4 in .pdf is this:

    Minimum time to live: suppresses the display of hostnames
    Numeric display: suppresses the display of known hops

    However, also from your link those answers above should be reversed. Can you please correct it ?

  17. albama
    June 11th, 2018

    @9tut is correct answer ?
    q2 correct answer is :
    #control plane:routing state exchange,filtering,device access
    #data plane :qos,establishing telnet sessions,data encapsultaion

    i see other pdfs diferent and valid answer it . thanks

  18. Ngo Ngoc Luu
    June 20th, 2018

    Hi everyone,

    Please send the latest dump 200-125 to me if you have, I am preparing for CCNA exam

    mail: ngongocluuuct @ gmail . com
    thanks,

  19. Anonymous
    June 21st, 2018

    hi everyone,

    Please send me the latest dump CCNA 200-125 to me if you’ll have, I am preparing for CCNA exam next week.

    mail- {email not allowed}

    thanks

Add a Comment