Home > EIGRP GRE Troubleshooting Sim

EIGRP GRE Troubleshooting Sim

March 19th, 2018 Go to comments

Refer to the topology below. Your company asks you to identify the issues in Phase 1 EIGRP implementation. You have console access on R1, R2, R3 Branch1 and Branch2 routers. Only use show commands to troubleshoot the issues.

Topology.jpg

Question 1

Explanation

R1 routing table does not have any EIGRP learned routes so R1 or the link between R1 & R2 is the most likely problem. We should check if the IP addresses on R1 and R2 are correct or not with the “show ip interface brief” command.

R1_show_ip_interface_brief.jpg

Note: You should check the IP address of R2 E0/0 interface (the interface connected to R1) as well.

Question 2

Explanation

The “main office” here refers to R2 (and other routers behind it). Check Branch2 with the “show ip route” command:

Branch2_show_ip_route.jpg

We can see Branch2 only uses 192.168.12.1 (Branch 1 – the secondary path) to reach R2 and the subnets behind. Branch2 does not use the primary path (directly connected to R2) so there must be a problem with the connection between R2 and Branch2. Check Branch2 router with the “show running-config” command and we can see an access-list is blocking EIGRP packets advertised to Branch2.

Branch2_show_run.jpg

Question 3

Explanation

This issue is same as Question 2 but this time it is R3 which causes the issue. We can check R3 with the “show running-config” command.

R3_show_run.jpg

Question 4

Explanation

In this question we should check the local routers to see if these subnets have been advertised or not as there are many issues in the path which prevent these subnets from being shown in the routing tables.

When checking Branch1 router, we notice “network 172.16.0.0” is missing under EIGRP 200 so answer D is correct.

Branch1_show_run.jpg

Comments (50) Comments
Comment pages
  1. RR
    April 11th, 2018

    Hi @MGL,

    Are the labs you indicated labs which you need to configure or some are multiple choice? Thanks. :)

  2. Brea
    April 11th, 2018

    Hey guys did my exam today and passed. 53qns in total.
    Lots of labs about 8 or 9….most of the scenarios are similar but the problems are quite different and need you to be more keen.
    Take note of the drag and drop for QoS and BGP.

  3. Muhiz
    April 11th, 2018

    @bera are these simulation questions are still valid ????

  4. ROHIT
    April 11th, 2018

    passed ccna exam on 10th of April.
    score 950
    total 53 questions.
    scenarios: EIGRP GRE, IPV6 OSPF, RIPV2, EIGRP AS x, access-list sim 2.

  5. Ikuoy
    April 12th, 2018

    @Brea what are you talking about. Most people got the same lab topology from 9tut and chinese dump. What are you talking about problems are different???

  6. Muhiz
    April 12th, 2018

    does someone have the pkt file for this ??

  7. Victor
    April 12th, 2018

    Thanks.I plan to write mine next week monday. Thank you for the headsup. Any other advise @Brea you would want me to note?

  8. wuji
    April 13th, 2018

    Does someone have PKT/GN* file for EIGRP GRE Tshoot Sim ? Thanks

  9. ninou
    April 14th, 2018

    Please,,,,,,
    I need the PKT for this lab my exam next month.

    berisl2000 at yahoo dot fr

    pleeease

  10. ram
    April 14th, 2018

    hai ROHIT can u provide me the dumps
    thanks in advance

  11. ram
    April 14th, 2018

    timothy293763 at gmail com

  12. salman shaikh
    April 15th, 2018

    can anyone provide current d u m p s
    ( dcentpal at gmail dot com )

  13. robind
    April 17th, 2018

    I passed today – 950 scory. All sims (GRE, EIGRP etc) and two labs (ipv6 OSPF and ACL) from this web. New things are, for example, Drag and Drop – six protocols: HTTP, DHCP, SMTP, SNMP, Telnet and one more must be added to TCP or UDP.

  14. Caroline
    April 17th, 2018

    Hey, can anyone who passed recently tell of GRE labs are same as dumps?

  15. robind
    April 18th, 2018

    Caroline, yes identical.

  16. Anonymous
    April 18th, 2018

    how many labs must be correct???

  17. akbar
    April 18th, 2018

    how to download these labs for prectice

  18. 9tut
    April 19th, 2018

    @robind: Congratulations on your passing! BUt your Drag Drop questions is not new. It has been posted at http://juquitiba.sp.gov.br/?exams=drag-and-drop-3 (Question 4).

  19. QK
    April 19th, 2018

    I just have passed the exam today with 940, got this lab EIGRP GRE sim as well as others. Be aware guys, the answers are not same as the lab here, but you should know how to troubleshooting with show commands, it will be the best friend in the exam. lots of new questions that i have not seen here, but i made it. Thanks for 9TUT, that gave me all the knowledge to pass the exam with 940.

  20. Shaz
    April 20th, 2018

    hi,
    Can someone pleaseeee send recent dumps at
    shehzad dot amir11 at gmail dot com

    please, i have exam in 4 days…
    thanks

  21. cathorine
    April 21st, 2018

    @QK
    do you feel lab in 9tut are enough for the answering the question? did the labs in 9tut cover all the troubleshoot command? i have my exam in 5 days. do u suggest to look for few more lab simulations?

    for other multiple choice and drag and drop, do we need to practice some other dumps?
    please respond. as i have exam in 5 days, i want to know, how difficult the paper was? and whether 9tut explanation is all we need to focus?

  22. Sinix
    April 24th, 2018

    Hello 9tut, I noticed that some sims do not have the packet tracer file to practice, like this one.
    Is the file available? Thanks

  23. QK
    April 24th, 2018

    To cathorine…

    yes the 9Tut labs cover all the that you need if, you understand the concept and how to troubleshooter the lan sims, for the labs that need for command or configuration, mostly are the same. just would like to say, you will pass for sure, if you do well with all labs and D&D. good luck in yr exam

  24. musyokxs
    April 27th, 2018

    passed the exam today…this eigrp lab was thea

  25. Amigo
    April 28th, 2018

    Please anyone with the new dumps email it to me please

    {email not allowed}

    thanks in advance

  26. Amigo
    April 28th, 2018

    azabkd[at]ugimail.net

  27. Muhammad Yaseen
    April 28th, 2018

    thnx 9tut.. yesterday was my exam and i have passed with good marks..
    53 qns with 2 labs

  28. tee
    April 28th, 2018

    @ muhammad Yaseen ,which labs were in yo exam

  29. Mohammed
    April 28th, 2018

    can anyone share me latest dumps for CCNA SP exams(640-875) to my email jarjis1792 at gmail . com

  30. Mohammed
    April 28th, 2018

    please kindly help

  31. TA
    May 2nd, 2018

    can not see a question for EIGRP GRE Troubleshooting Sim. can anyone paste it here?

  32. w
    May 2nd, 2018

    can anyone send me the canna sp 640-875 dumbs please to email waleed dot it dot k at gmail.com

  33. sagar
    May 3rd, 2018

    Passed Exam yesterday, SIM include EIGRP GRE(TS), RIPV2(TS), DHCP(TS), AccessList1(TS), Accesslist2(LAB),VLAN (Lab).

  34. hrs
    May 3rd, 2018

    hi sagar,
    can u pls share me latest dump.
    hurais.samsung at gmail dot com

  35. ninou
    May 5th, 2018

    Passed exam yesterday
    -53 questions
    – So many multi choice new questions
    -EIGRP GRE, RIPV2 , Access list 1, Access list 2, GRE multilink, OSPF
    -drag and drop: QOS , BGP, Cables,

    some lab answers are not the same like here.

    Good luck

  36. Hrieschurrlle
    May 6th, 2018

    please someone help me by providing chinese dump and pkt files…
    I can’t understand this sim question clearly…
    {email not allowed}

  37. Hrieschurrlle
    May 6th, 2018

    rhm dot reay313 at gmail dot com…

  38. imdar assyatir
    May 6th, 2018

    imdarassyatir1 at gmail dot com, please share the last dumb

  39. Abdul
    May 6th, 2018

    Guys, looking for CCNA RnS dumps at mylostresort at gmail dot com

  40. joe
    May 7th, 2018

    in question 1 why is None of the internal routes other than locally connected appear in the routing table I think the first command to issue is “sh ip eigrp neighbor” to see if there are any hello packets received at the local intrerface which there is none. then now you can go ahead and troubleshoot the local interfaces..

  41. darren
    May 7th, 2018

    kindly please share the last dump for ccna to dickyalbarqy at gmail dot com

  42. vlonee
    May 8th, 2018

    please kindly share latest dumps ibrahim.ugbede at yahooDotCom thanks.

  43. amr
    May 8th, 2018

    latest dump please {email not allowed}

  44. amr
    May 8th, 2018

    amr.elsherif1 at gmail dot com

  45. Nervous Test Taker
    May 8th, 2018

    Hello Everyone…the EIGRP GRE Troubleshooting Sim shows answers to questions, however the questions are not displayed (unless I am understanding them wrong)? Can someone please advise? Also…is there a packet tracer setup for this sim?

  46. 9tut
    May 8th, 2018

    @Nervous Test Taker: Please make sure you have installed latest Flash plugin at: https://get.adobe.com/flashplayer and enable it on your web browser.

  47. ninou
    May 8th, 2018

    @ Nervous Test Taker : the questions are in of first page of these comments.

  48. Wanderer00
    May 9th, 2018

    pass your CCNA 200-125 course : https://udemy.com/pass-your-ccna-200-125/ use this coupon : ” CCNA42006_125 “

  49. Anonymous
    May 11th, 2018

    sitting my exams early next months. latest dumps to ({email not allowed})
    thanks.

  50. Anonymous
    May 11th, 2018

    latest dumps to samuel.odimbo at gmail dot com
    doing my exam early next month.
    thanks.

Comment pages
Add a Comment