Home > OSI Model Tutorial

OSI Model Tutorial

November 2nd, 2011 Go to comments

Welcome to the most basic tutorial for networker! Understanding about OSI model is one of the most important tools to help you grasp how networking devices like router, switch, PC… work.

Let’s take an example in our real life to demonstrate the OSI model. Maybe you have ever sent a mail to your friend, right? To do it, you have to follow these steps:

1. Write your letter
2. Insert it into an envelope
3. Write information about sender and receiver on that envelope
4. Stamp it
5. Go to the post office and drop it into a mail inbox

From the example above, I want to imply we have to go through some steps in a specific order to complete a task. It is also applied for two PCs to communicate with each other. They have to use a predefined model, named OSI, to complete each step. There are 7 steps in this model as listed below:

OSI_Model.jpg

This is also the well-known table of the OSI model so you must take time to learn by heart. A popular way to remember this table is to create a fun sentence with the first letters of each layer. For example: All People Seem To Need Data Processing or a more funny sentence sorted from layer 1 to layer 7: Please Do Not Throw Sausage Pizza Away.

There are two notices about this table:

1. First, the table is arranged from top to bottom (numbering from 7 to 1). Each step is called a “layer” so we have 7 layers (maybe we usually call them “layers” to make them more… technical ^^).

When a device wants to send information to another one, its data must go from top to bottom layer. But when a device receives this information, it must go from bottom to top to “decapsulate” it. In fact, the reverse action at the other end is very natural in our life. It is very similar when two people communicate via mail. First, the writer must write the letter, insert it into an envelope while the receiver must first open the envelope and then read the mail. The picture below shows the whole process of sending and receiving information.

OSI_Model_sending_receiving.jpg

Note: The OSI model layers are often referred to by number than by name (for example, we refer saying “layer 3” to “network layer”) so you should learn the number of each layer as well.

2. When the information goes down through layers (from top to bottom), a header is added to it. This is called “encapsulation” because it is like wrapping an object in a capsule. Each header can be understood only by the corresponding layer at the receiving side. Other layers only see that layer’s header as a part of data.

OSI_Model_headers_added.jpg

At the receiving side, corresponding header is stripped off in the same layer it was attached. This process is called “decapsulation”.

Understand each layer

Layer 7 – Application layer

This is the closest layer to the end user. It provides the interface between the applications we use and the underlying layers. But notice that the programs you are using (like a web browser – IE, Firefox or Opera…) do not belong to Application layer. Telnet, FTP, email client (SMTP), HyperText Transfer Protocol (HTTP) are examples of Application layer.

Layer 6 – Presentation layer

This layer ensures the presentation of data, that the communications passing through are in the appropriate form for the recipient. In general, it acts as a translator of the network. For example, you want to send an email and the Presentation will format your data into email format. Or you want to send photos to your friend, the Presentation layer will format your data into GIF, JPG or PNG… format.

Layer 5 – Session layer

Layer 5 establishes, maintains and ends communication with the receiving device.

Layer 4 – Transport layer

This layer maintains flow control of data and provides for error checking and recovery of data between the devices. The most common example of Transport layer is Transmission Control Protocol (TCP) and User Datagram Protocol (UDP).

Layer 3 – Network layer

This layer provides logical addresses which routers will use to determine the path to the destination. In most cases, the logic addresses here means the IP addresses (including source & destination IP addresses).

Layer 2 – Data Link Layer

The Data Link layer formats the message into a data frame, and adds a header containing the hardware destination and source address to it. This header is responsible for finding the next destination device on a local network.

Notice that layer 3 is responsible for finding the path to the last destination (network) but it doesn’t care about who will be the next receiver. It is the Layer 2 that helps data to reach the next destination.

This layer is subdivide into 2 sub-layers: logical link control (LLC) and media access control (MAC).

The LLC functions include:
+ Managing frames to upper and lower layers
+ Error Control
+ Flow control

The MAC sublayer carries the physical address of each device on the network. This address is more commonly called a device’s MAC address. MAC address is a 48 bits address which is burned into the NIC card on the device by its manufacturer.

Layer 1 – Physical layer

The Physical Layer defines the physical characteristics of the network such as connections, voltage levels and timing.

To help you remember the functions of each layer more easily, I created a fun story in which Henry (English) wants to send a document to Charles (French) to demonstrate how the OSI model works.

OSI_7_layers_fun.jpg

 

Lastly, I summarize all the important functions of each layer in the table below (please remember them, they are very important knowledge you need to know about OSI model):

Layer Description Popular Protocols Protocol Data Unit Devices operate in this layer
Application + User interface HTTP, FTP, TFTP, Telnet, SNMP, DNS… Data  
Presentation + Data representation, encryption & decryption

+ Video (WMV, AVI…)
+ Bitmap (JPG, BMP, PNG…)
+ Audio (WAV, MP3, WMA…)
….

Data  
Session + Set up, monitor & terminate the connection session + SQL, RPC, NETBIOS names… Data  
Transport + Flow control (Buffering, Windowing, Congestion Avoidance) helps prevent the loss of segments on the network and the need for retransmission + TCP (Connection-Oriented, reliable)
+ UDP (Connectionless, unreliable)
Segment  
Network + Path determination
+ Source & Destination logical addresses
+ IP
+ IPX
+ AppleTalk
Packet/Datagram Router
Data Link

+ Physical addresses

Includes 2 layers:
+ Upper layer: Logical Link Control (LLC)
+ Lower layer: Media Access Control (MAC)

+ LAN
+ WAN (HDLC, PPP, Frame Relay…)
Frame Switch, Bridge
Physical

Encodes and transmits data bits

+ Electric signals
+ Radio signals

+ FDDI, Ethernet Bit (0, 1) Hub, Repeater…

Note: In fact, OSI is just a theoretical model of networking. The practical model used in modern networks is the TCP/IP model. You may think “Hm, it’s just theoretic and has no use in real life! I don’t care!” but believe me, you will use this model more often than the TCP/IP model so take time to grasp it, you will not regret – I promise :)

Comments (12) Comments
Comment pages
1 11 12 13 912
  1. Saleem
    October 30th, 2017

    Thank you…

  2. esoo
    October 31st, 2017

    Please ,send me the latest dumps for CCNA.My exam will be in the next few days .esraawaleed47@gmaildotcom

  3. karim
    October 31st, 2017

    please, send me the latest dumps For CCNA ASAP. My exam will be soon….. {email not allowed}

  4. karim
    October 31st, 2017

    Please, send me the latest update dump for CCNA 200_125
    karimalsinary@gmail dot com

  5. paul
    November 4th, 2017

    My exam is scheduled on monday it would be a big help sending latest dumps for CCNA . akosholo21@gmail dot com thank you very much in advance

  6. Anonymous
    November 9th, 2017

    iam preparing for CCNA exam.any body have latest dumps kindly send it to {email not allowed}ks in advance

  7. pawka
    November 13th, 2017

    Please ,send me the latest dumps for CCNA.My exam will be in the next few days pja96@yahoo dot com

  8. Manisha
    November 19th, 2017

    Please, send me the latest dumps for CCNA R&S to {email not allowed}. Thank you.

  9. NebitanLik
    November 20th, 2017

    Have just finished ccna exam.
    All question from 9tut (without additional questions!)
    Acl2 and ospf troubleshooting.
    Tnx 9tut

  10. NebitanLik
    November 20th, 2017

    Do not ask for the latest dumps. Just go through 9tut q/a as well as through sim labs and you’re on good way.

  11. Rangel. Dzhoglov
    November 21st, 2017

    Please ,send me the latest dumps for CCNA.My exam will be in the next few days . vector@maildotbg

  12. akram
    November 22nd, 2017

    this is really genuius

Comment pages
1 11 12 13 912
Add a Comment